Neoprene Contact Adhesive 10

Filter Type: All Time (2 Results) Past 24 Hours Past Week Past month Post Your Comments?

Listing Results Neoprene Contact Adhesive 10

(651) 737-6501

3M™ Neoprene High Performance Contact Adhesive 1357 and 1357-L have a shelf life of 15 months. Precautionary Information Refer to Product Label and Material Safety Data Sheet for health and safety information before using this product. For additional health and safety information, call 1-800-364-3577 or (651) 737-6501.

Preview / Show more

Updated: 8 hours ago

See Also:Neoprene Contact Cement, Verify It   Show details

(651) 737-6501

Adhesive aerosol, General Purpose Aerosol adhesive 1.3. Supplier’s details MANUFACTURER: 3M DIVISION: Industrial Adhesives and Tapes Division ADDRESS: 3M Center, St. Paul, MN 55144-1000, USA Telephone: 1-888-3M HELPS (1-888-364-3577) 1.4. Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours) SECTION 2: Hazard identification 2.1.

Preview / Show more

Updated: 3 hours ago

See Also:3m Adhesive Contact Number, Tm Net Contact Number, Verify It   Show details

All Time (2 Results) Past 24 Hours Past Week Past month

Please leave your comments here:

 

  • Frequently Asked Questions

  • How do you use adhesive backed magnets on drywall?

    For situations where there isn’t anything magnetic about the wall, or if it is not possible to drive screws into the wall, our adhesive backed magnets are a great solution. We only stock them in two sizes: the 3/8 diameter D61AD-P and the D81AD-P. Stick and press the adhesive backed magnet to the drywall.

  • What determines the size of the neoprene fabric?

    The size of the mold defines the size of the neoprene sponge so the size of the neoprene sponge defines the size of the neoprene fabric.

  • How do you apply air shield self adhesive self adhesive?

    Application Method … AIR-SHIELD self-adhesive air/vapor and liquid moisture barrier can be applied at minimum temperatures of 40º F (4º C). Apply membrane to surface addressed with MEL-PRIME by removing release paper and rolling membrane firmly into place. Remove release paper only as membrane is being applied.

  • What kind of adhesive is AJ adhesive?

    AJ Adhesives distributes a complete line of engineered structural adhesives manufactured by Adhesive Systems, Inc. (ASI). ASI’s no-mix structurals, UV curables, one and two-part epoxies, and two-part methacrylates can be used for a diverse range of assembly applications.

  • Where are PVN & neoprene foams made?

    Fostek has developed and produces our family of Vinyl/Nitrile (PVN) & Neoprene closed cell foams in our IATF 16949:2018 certified production facility in Bedford, Virginia. What is Fostek’s “point of difference?”

Related Search